返回首页|实验台|实验桌|通风柜|通风橱|佛山市广泰模具制造中心设备 _广东返回首页品牌
华南干细胞与再生医学研究中心

 设计理念

●以控制室内空气细菌或者微生物为目的,确保细菌或者其他微生物没有生存的载体;同时避免微尘颗粒受外界污染,影响实验结果的准确性。

●佛山市广泰模具制造中心布局按照安全要求合理地划分成清洁区、半污染区和污染区,采用人与物分别设置专用通道,设置必要的缓冲间,采用一次隔离和二次隔离等措施,有效的避免交叉污染,从根本上防止危险性微生物的扩散;佛山市广泰模具制造中心环境保证生物安全佛山市广泰模具制造中心始终处于相对密封的环境,防止微生物的外逸,易于佛山市广泰模具制造中心的清洁消毒,同时避免外部对佛山市广泰模具制造中心环境的破坏。

●佛山市广泰模具制造中心气流采用变频控制,独立排放。

●台面采用专用佛山市广泰模具制造中心理化板,在耐腐蚀的同时也满足防菌和易清洁的效果。

 

客户评价

我们单位佛山市广泰模具制造中心项目时间很紧,为了迎接中国军事医学科学院的领导视查,项目务必要在50天内完成,创美公司高度重视,加班加点在45天内完成并通过验收,我们很感谢!创美公司自主研发的VOLAB智能通风柜是我见过的国内最好的通风柜。智能触摸屏控制,手自一体电动升降门,自主研发VAV智能控制系统,性能稳定,方便精确。房间控制系统可以送排风联动,保证房间压差在很稳定的状态,还可以根据客户要求个性化定制中英文界面,使用也非常方便,很感谢创美公司给我们建造这么完美的佛山市广泰模具制造中心。

Design Concept:

For the purpose to control indoor air bacteria or microorganisms, ensuring no survive carrier for bacteria or other microbes; while avoiding external contamination by dust particles affect the accuracy of results.

In accordance with a safety requirement, laboratory layout is divided into clean areas, semi-polluted area and contaminated area, adopt separately channels for people and objects, set necessary buffer room, using first and secondary isolation, to effectively prevent cross- pollution, fundamentally prevent the spread of dangerous microbes, lab environment to ensure biosafety laboratory is always in a relatively closed environment, to prevent escape of microorganisms, laboratory easy to clean and disinfect, while avoiding outside things damage to the laboratory environment.

Laboratory flow using VAV control, independent emission.

Use laboratory phenolic resin worktop, corrosion-resistant, easy to clean and anti-bacteria.

 

Customer feedback: Our time is very tight about the laboratory project, in order to meet the checking by leadership of the China Academy of Military Medical, we need to be sure projects completed in 50days, Volab payed great importance on this and complete the whole project within 45 days, we are very grateful ! Chuangmei its developed VOLAB intelligent fume hood is good designed. Intelligent touch-screen control, independent automative door system, VAV intelligent control system, stable performance, convenient and accurate. Room control system can send exhaust linkage to ensure stable room pressure status. Also can be customized according to individual customer requirements in the English version, very easy to use, grateful to them give us such a good laboratory .

 

此文关键字:实验台,佛山市广泰模具制造中心通风柜,返回首页,通风柜,实验桌,佛山市广泰模具制造中心台柜,VOLAB

关于“客户评价 ”的相关资讯